← Journal

Garment Costing: Cost Sheet, FOB & Price Calculator (2026)

A factory worker smoothing striped fabric on a long cutting table in a bright garment factory
Published
Reading time
6 minutes
Category
Reference

A garment’s cost is materials plus make, which gives you the FOB price. Add freight and duty and you have the landed cost, the number your wholesale and retail prices should be built on. Try your own numbers in the calculator below.

Garment cost calculator

Materials
€12.94
FOB price
€22.44
Landed cost
€26.03
Wholesale price
€57.26
Retail price
€143.16
Gross margin
55% wholesale · 82% direct
In one line
Each piece costs €26.03 to land. Sold wholesale at €57.26 you keep €31.23; sold direct at €143.16 you keep €117.13 before shipping, returns and marketing.

The short answer: add up fabric (consumption × price per metre, plus wastage), trims, labels and packaging, then the factory’s charge to cut, sew and finish. That’s your FOB price. Add freight, insurance and import duty to get the landed cost. Multiply the landed cost to set your wholesale price, and the wholesale price to set your retail price.

The terms: FOB, CMT and landed cost

  • FOB (Free On Board): strictly a shipping term, meaning the factory delivers the goods onto the ship at the port of export and you pay everything after that. In apparel, “the FOB” is also used loosely for the factory’s price per piece, including materials and make.
  • CMT (cut, make, trim): you buy and supply the fabric and usually the trims; the factory charges only for cutting, sewing and finishing.
  • Full price (full package): the factory sources every material and quotes one price per piece. Most FOB quotes are full price.
  • EXW, CIF and DDP: other shipping terms. Ex works means you collect at the factory; CIF means the factory pays freight and insurance to your port; DDP means it delivers with import duty paid.
  • Landed cost: what one piece costs once it’s in your warehouse: FOB plus freight, insurance, import duty and customs fees.
  • Markup and margin: markup is measured on cost, margin on the selling price. Buying at €20 and selling at €50 is a 2.5× markup and a 60% margin.

What goes on a garment cost sheet

A cost sheet lists every cost line for one style, so nothing is forgotten and you can see how the final price was reached. It usually follows your bill of materials:

  • Fabric: consumption per garment × price per metre, plus a wastage allowance for cutting. Fabric is usually the largest single cost.
  • Trims: zips, buttons, drawcords, eyelets, elastic, thread.
  • Labels and packaging: main, size and care labels, hang tags, polybags and a share of the carton.
  • Make: cutting, sewing, finishing and pressing. Factories often work this out from the minutes each operation takes.
  • Extras: printing, embroidery, garment washing or dyeing, and any testing.
  • Factory overhead and profit: built into the make price or the full-package quote.
  • Getting it to you: freight, insurance, import duty, customs brokerage and delivery to your warehouse.

Cost sheets are per colourway as much as per style. A printed or garment-dyed colourway can cost more than the plain one, and larger sizes use more fabric.

A worked example: costing a hoodie

These are the calculator’s default numbers, for a cotton fleece hoodie with a chest print made outside the EU and imported into the EU. They’re illustrative, not quotes: your fabric, factory and duty rate will differ.

Cost lineHow it’s worked outPer piece
Fabric1.5 m × €7.20, plus 5% wastage€11.34
Trims and labelsDrawcord, eyelets, main, size and care labels, hang tag€1.20
PackagingPolybag and a share of the carton€0.40
MakeCut, sew, finish and press€8.00
PrintOne-colour chest print€1.50
FOB price€22.44
Freight and insuranceSea freight share per piece€0.80
Import duty12% of €23.24 (FOB + freight)€2.79
Landed cost€26.03
Wholesale priceLanded cost × 2.2€57.26
Retail priceWholesale × 2.5€143.16

The duty rate is an example. Look up your product’s HS code in your import country’s tariff (TARIC in the EU, the UK Trade Tariff, or the HTS in the US). Where duty is charged on also differs: the EU and UK include freight and insurance to the border in the customs value, while the US generally charges duty on the price paid to the factory, without international freight. The calculator’s “Importing into” setting switches between the two.

Full price or CMT: which should you ask for?

With full price, the factory buys the materials, carries the risk of shortages and quotes one number, which makes budgeting simpler. It suits most small brands and first collections.

With CMT, you buy the fabric and trims yourself and pay the factory to make. You control quality and supplier choice, and can sometimes buy cheaper, but you pay for materials up front, manage the deliveries to the factory and own any fabric that’s left over. It suits brands with fabric they want to reuse across styles or a mill relationship of their own.

Either way, the cost sheet adds up the same lines. What changes is who pays for them, and when.

From landed cost to retail price

The traditional rule is keystone: double the cost to get the wholesale price, then the retailer doubles that again. Many brands now use higher multipliers. Commonly quoted ranges are about 2 to 2.5× from cost to wholesale, and 2.2 to 2.5× from wholesale to retail, with direct-to-consumer brands often higher.

Base your multipliers on landed cost, not FOB, or freight and duty quietly eat your margin. And remember the costs a cost sheet doesn’t show: samples, shipping to customers, returns, payment fees, marketing and, for wholesale, sales commission and trade shows.

Working backwards: your target FOB

Most brands know the retail price they want before they know the cost. Work backwards to find the most you can pay the factory:

  • Retail price: €120
  • Wholesale price: €120 ÷ 2.5 = €48.00
  • Highest landed cost: €48 ÷ 2.2 = €21.82
  • Remove duty: €21.82 ÷ 1.12 = €19.48 (FOB + freight)
  • Remove freight: €19.48 − €0.80 = €18.68 target FOB

The hoodie above comes in at €22.44, so it’s €3.76 over a €120 retail price. You can change the fabric, drop the print, raise the retail price or accept a lower margin. Share the target with your factory before it quotes, so it can suggest where to save.

How to compare factory quotes

  • Same spec: send every factory the same tech pack, with the same fabric, trims and size range.
  • Same terms: make sure every quote uses the same shipping term (FOB, EXW or DDP) and currency.
  • Per colourway: ask for a price per colourway when they differ in fabric or print.
  • Read the small print: note the MOQ, the lead time and whether sample costs are included.
  • Keep the history: keep every revised quote, not just the latest, so you know what changed and why.

Common costing mistakes

  • Forgetting wastage. Fabric lost in cutting is paid for. Ask your factory what it allows.
  • One cost for every colourway. Prints, dyes and special fabrics change the price.
  • Pricing from FOB. Freight, duty and brokerage can add a meaningful share on top.
  • Ignoring small-run surcharges. Below a factory’s minimum, the price per piece often goes up.
  • Old numbers. Fabric prices, freight rates, exchange rates and duties change. Re-cost before every order.

Costing in Specter OS

Specter OS keeps the cost sheet on the same record as the tech pack, so a change to the BOM shows up in the cost:

  • Full price or CMT per style, with a separate quote per colourway when you need one.
  • BOM with consumption and price columns, and price overrides per colourway.
  • Target FOB per colourway, carried over automatically from your sample request.
  • Quotes side by side, numbered per supplier, with a note on each for MOQ or lead time. Every quote is kept as history.
  • A costing PDF with one panel per colourway and the best offer highlighted, and a collection overview grouped by factory.

Costing is on every plan, including the free one. Suppliers quote inside Specter OS on paid plans, where factory seats are free. See pricing.

Frequently asked questions

What is garment costing?

Garment costing is working out what one piece of clothing costs to make and deliver: materials, make, extras, freight and duty. It’s the basis for your wholesale and retail prices.

What is the difference between FOB and CMT?

An FOB (full package) price covers materials and make, with the factory buying the fabric and trims. A CMT price covers only cutting, making and trimming, because you supply the materials yourself.

What is landed cost in clothing?

Landed cost is the FOB price plus freight, insurance, import duty and customs fees: the full cost of one piece once it reaches your warehouse.

How do I calculate a wholesale price for clothing?

Multiply your landed cost by your wholesale multiplier. Keystone pricing doubles it; many brands use 2 to 2.5×. Check that the result still leaves room for a retailer’s markup at the retail price you want.

What is the difference between markup and margin?

Markup is profit as a share of cost; margin is profit as a share of the selling price. A garment bought at €20 and sold at €50 has a 2.5× (150%) markup and a 60% margin.

How much fabric wastage should I allow?

It depends on the fabric, the pattern and how efficiently the factory lays out the marker. Ask your factory what it allows; our example uses 5%.