← Journal

Textile Abbreviations: Every Fibre Code on Labels, Mill Sheets & Tech Packs

Hands holding a 100% cotton care label with washing symbols on a black garment
Published
Reading time
8 minutes
Category
Reference

Textile abbreviations are short codes for fibres: CO is cotton, PES is polyester, EL is elastane, CV is viscose and WO is wool. Search the full list below, grouped by fibre type, with the older codes you’ll still see on mill sheets.

Look up a code

    Where textile abbreviations come from

    The codes for man-made fibres, such as CV, PES and EL, are set by the international standard ISO 2076. It defines each generic fibre name, its two- to four-letter code and what the fibre has to be chemically to use that name.

    Natural fibres such as cotton, wool and silk are not covered by ISO 2076. Their codes (CO, WO, SE and so on) come from older European systems that mills and label suppliers still use. That is why you will sometimes see two codes for the same fibre, and why the same letters can mean different things from different suppliers. The tables below give the standard code first and common alternatives after it.

    Animal fibres

    Wool and the fine animal hairs all start with W, followed by a second letter for the animal. Silk is the exception.

    Code Fibre Notes
    WOWoolSheep’s wool unless another animal is named
    WVVirgin wool / new woolWool not previously used or processed
    WSCashmereCashmere goat
    WMMohairAngora goat
    WAAngoraAngora rabbit
    WPAlpaca
    WLLlama
    WKCamel hair
    WGVicuña
    WYYak
    SESilkIncludes mulberry and wild (tussah) silk

    “Virgin wool” or “new wool” (WV) means wool that has not been used or processed in a product before. Angora (WA) comes from the Angora rabbit, while mohair (WM) comes from the Angora goat, which confuses a lot of people.

    Plant fibres

    Natural fibres from plants, also called natural cellulose fibres. Cotton and linen are the ones you’ll use most in apparel.

    Code Fibre Notes
    COCotton
    LILinenMade from flax
    HAHemp
    RARamie
    JUJuteMostly bags, packaging and interiors
    ABAbacaAlso called Manila hemp
    SISisal

    Regenerated cellulose fibres

    Also called semi-synthetic or man-made cellulosic fibres. They start from wood pulp or cotton waste that is dissolved and spun back into a fibre. These are the codes where US and EU names differ most: viscose, modal and lyocell can all be labelled “rayon” in the US.

    Code Fibre Older code Other names
    CVViscoseVIRayon (US, Japan)
    CMDModalMDRayon (US)
    CLYLyocellRayon (US); sold as Tencel by Lenzing
    CUPCuproCU
    CAAcetateAC
    CTATriacetateTA
    ALGAlginateMade from seaweed

    Tencel is not a fibre name: it is Lenzing’s brand for its lyocell and modal fibres. On a label or in a BOM, write the generic name (lyocell or modal) and add the brand if you are allowed to use it.

    Synthetic fibres

    Fibres made from synthetic polymers. Polyester, polyamide and elastane cover most of what goes into apparel.

    Code Fibre Older code Other names
    PESPolyesterPL, PEIncludes recycled polyester
    PAPolyamideNYNylon
    ELElastaneEASpandex (US), Lycra (brand)
    PANAcrylicPC
    MACModacrylic
    PPPolypropylene
    PEPolyethyleneNot polyester; see the note below
    EDElastodieneRubber
    CLFChlorofibrePVC-based fibres
    PTFEFluorofibre
    ARAramidHeat- and cut-resistant fibres
    PIPolyimide
    PVALVinylal

    Recycled fibres don’t have their own codes in ISO 2076. Recycled polyester is still PES; shorthand like rPES or rPET is common in sales material but is not a standard code, so state the recycled content in words in your tech pack.

    Inorganic fibres

    Code Fibre Older code
    MTFMetalME, MT
    GFGlassGL
    CFCarbon

    Older and alternative codes

    These codes are not the current standard, but you will still find them on mill sheets, older tech packs and Italian or German supplier documents. If a code is ambiguous, ask your supplier to confirm the fibre in full.

    Code you see Usually means Standard code
    VIViscoseCV
    MDModalCMD
    CUCuproCUP
    ACAcetateCA
    TATriacetateCTA
    PCAcrylicPAN
    EAElastaneEL
    PLPolyesterPES
    PEPolyester on some older documents; polyethylene in ISO 2076Check with supplier
    NYNylon (polyamide)PA
    MEMetal or metallised yarnMTF
    PU / PURPolyurethane: usually elastane, or a PU coatingEL, or describe the coating
    PVCPVC fibreCLF
    PBTPolybutylene terephthalate, a polyester used in stretch fabricsPES family
    TNTencel (brand shorthand)CLY or CMD

    Watch out for PE. In ISO 2076, PE is polyethylene. Some older lists and suppliers use PE for polyester. If a fabric sheet says “PE”, confirm which one is meant before it goes into your BOM.

    Can you use abbreviations on care labels?

    Usually not. In the EU, the Textile Regulation (EU) No 1007/2011 requires the fibre composition on the label to use the fibre names it lists, in the official language of the country where the product is sold. It also states that abbreviations shall not be used, except for a mechanised processing code, or standard abbreviations that are explained in the same commercial document.

    In practice, that means codes like CO and PES belong in your tech packs, purchase orders and supplier documents. Your care label should say “95% cotton, 5% elastane” in full, translated for each market you sell in.

    The US uses its own names under the Textile Fiber Products Identification Act, which is why a label for the US says “spandex” where an EU label says “elastane”, and “rayon” where an EU label says “viscose”. If you sell in both markets, plan for both versions of the label artwork. This page is a practical guide, not legal advice; check the current rules for each market before you print labels.

    How to write fibre composition in a tech pack

    Codes save space in a BOM, but only if everyone reads them the same way. A few habits help:

    • Use the ISO code where there is one, such as CV rather than VI and PES rather than PL, so the code means the same thing to every supplier.
    • Always give percentages, listed from highest to lowest: “95% CO, 5% EL”.
    • Put the fibre composition next to construction and weight, for example “95% CO 5% EL, single jersey, 220 GSM”. See our fabric GSM guide for how to spec weight, and the GSM to oz converter if your mill quotes in ounces.
    • Spec each component separately when a garment has a lining, rib or contrast fabric, because each one needs its own composition on the label.
    • Write out the full names on the label artwork you send to the label supplier, in every language you need.

    Frequently asked questions

    What does CO mean on a clothing label? CO is the code for cotton. “100% CO” means 100% cotton.

    What does PES mean in fabric? PES is polyester. Some suppliers write PL, and older documents sometimes use PE, which in the ISO standard means polyethylene.

    What is the difference between EL and EA? Both mean elastane (also called spandex or by the brand name Lycra). EL is the ISO code; EA is an older code still common on Italian documents.

    What does CV mean in fabric? CV is viscose, sold as rayon in the US. VI is an older code for the same fibre.

    What does PA mean in fabric? PA is polyamide, better known as nylon.

    What does WO or WV mean? WO is wool. WV is virgin or new wool, meaning wool that has not been used or processed in a product before.

    What does WS mean on a label? WS is cashmere, the fine undercoat of the cashmere goat.

    What is CLY? CLY is lyocell, the fibre Lenzing sells under the Tencel brand.

    Can I print abbreviations on my care labels? In the EU, generally not: the label has to use the full fibre names in the local language. Use codes in your tech pack and supplier documents, and full names on the label. See abbreviations on care labels above.

    For keeping every fabric’s composition, construction and weight in one place, see how to build a fashion material library. For where fibre composition sits in your BOM, see how to make a tech pack.

    In Specter OS, every fabric sits on the BOM line of the style that uses it, with its composition, weight and supplier, so your factory quotes and builds from the same spec you wrote. Start free with Specter OS →