← Journal

Garment Sampling Process: Proto, Fit, PP & Size Set Samples (2026)

A designer pinning a calico toile jacket on a dress form beside hanging paper patterns in a bright studio
Published
Reading time
6 minutes
Category
Reference

Every style goes through samples before bulk production. Here’s what each sample is for, the order they come in, how to give feedback that gets the next round right, and how to keep track of it all.

The sampling process at a glance

The short answer: most styles go from a proto sample to one or more fit samples, then a size set, a pre-production (PP) sample and finally a top of production (TOP) sample from the bulk run. Sales and photo samples are made alongside when you need them for selling. Each round ends with a written decision, and the approved PP sample becomes the standard the bulk order is checked against.

Every round is made from your tech pack, so the better the tech pack, the fewer rounds you need.

Types of garment samples

SampleWhat it’s forMade inWho signs off
Proto (first) sampleChecks the design, construction and basic fit as drawn in the tech packSimilar fabric; bulk fabric often isn’t ready yetDesign and product team
Fit sampleChecks fit and measurements against the spec in your base size, repeated until approvedFabric as close to bulk as possibleTechnical or fit team
Salesman (SMS) and photo samplesShown to buyers, used for the lookbook or product photosBulk or near-bulk fabric and coloursSales and marketing
Size setChecks grading: one sample in each size, or a selectionBulk fabric where possibleTechnical team
Pre-production (PP)Confirms everything before bulk is cut: fabric, trims, labels, wash and constructionBulk materials onlyThe brand, in writing
Top of production (TOP)Checks that early bulk matches the approved PP sampleTaken from the first finished piecesThe brand or its quality inspector

The order isn’t universal. Some brands ask for the size set before the PP sample, others after it, and some factories count the proto as the first fit sample. Agree the sequence and the names with your factory at the start, so “PP approved” means the same thing to everyone.

Material approvals: lab dips, strike-offs and trims

Alongside the fit rounds, the materials go through their own approvals. All of them should be signed off before the PP sample:

  • Lab dips: small dyed swatches matched to your colour standard. You approve one, or ask for another round.
  • Strike-offs: a test of your print or artwork on the actual fabric, checked for colour, scale and placement.
  • Bulk fabric: a swatch from the production lot, checked for shade, hand feel and weight.
  • Trims and labels: zips, buttons, drawcords, labels and hang tags, checked against the BOM. Our zipper guide covers what to specify.

How many sample rounds to expect

There’s no fixed number. A simple style from a complete tech pack, made by a factory that already knows your fit, may be approved after one fit round. A new fit or a technical garment can take several. What drives the count:

  • How complete the tech pack is. Missing measurements and vague construction notes are the most common cause of extra rounds. See common tech pack mistakes.
  • Whether you reuse an approved block. Starting from a pattern that already fits saves rounds.
  • How clear the feedback is. One numbered list per round beats comments scattered across email and chat.
  • Material changes. Switching fabric mid-sampling changes the fit, and often means another round.

Each round adds the factory’s sample lead time, shipping and your review. Put the sample rounds on your critical path, working back from the ex-factory date, so a late approval doesn’t quietly move the delivery. See how that works in production management.

How to give sample feedback

  • Review it properly. Try the sample on a fit model or form in your base size, and look at it inside out as well as on the body.
  • Measure every point of measure. Compare each one with the spec and its tolerance, and flag anything outside it.
  • Show, don’t describe. Photograph each issue and mark it with a numbered callout.
  • Send one list. Number every comment in one document per round, so nothing gets lost.
  • Update the tech pack. The next round is made from the tech pack, not from your email, so the change has to be there.
  • Say what’s right, too. Confirm what’s approved, so the factory doesn’t change something that already works.

A measurement check for a hoodie fit sample might look like this:

Point of measureSpec (cm)ToleranceMeasuredComment
Chest width56±157.5Out by +1.5: reduce
Body length72±171.5OK
Sleeve length64±166Out by +2: shorten
Hood height36±0.536OK

Approving a sample

Close every round with one of three decisions, recorded with who made it and when:

  • Approved: move to the next stage.
  • Approved with comments: move on, and fix the listed points in the next sample.
  • Rejected: another round of the same sample is needed.

The PP approval matters most. Once you approve it, both sides keep a labelled reference, often called a sealed sample, and the bulk order is inspected against it. The factory shouldn’t approve its own PP sample, and a PP sample made in substitute fabric isn’t really a PP sample.

A sample tracker you can copy

For a handful of styles, a spreadsheet works. Use one row per sample, per round:

StyleColourwaySampleRoundFactoryDueReceivedDecision
HD-104 HoodieBlackProto1Factory A3 Feb5 FebApproved with comments
HD-104 HoodieBlackFit2Factory A24 Feb24 FebApproved
HD-104 HoodieBlackPP1Factory A17 Mar–Waiting

Add columns for the requested date, the owner and a link to the comments and photos. Once you’re running a whole collection across several factories, the spreadsheet starts to drift from the tech pack, and that’s usually the moment brands move to a PLM. These seven signs help you tell when.

Who pays for samples?

Usually the brand. Development samples are often charged at a higher price per piece than bulk, because a small run takes the same setup. Some factories credit sample costs against the bulk order once it’s placed. Ask for the sample price and terms with the quote, and check whether courier costs are included. Sampling is quoted separately from your MOQ, and its cost belongs in your garment costing.

Sampling in Specter OS

Specter OS keeps every sample round on the same record as the tech pack, so the factory always works from the current spec:

  • Sample requests, with the target FOB carried over to the style’s costing.
  • Sampling rounds and feedback on the style, next to the measurements with grade rules and tolerances.
  • Construction callouts pinned to the flat, so comments point at the exact spot.
  • Sample feedback as a PDF to send to your factory.
  • Approvals: request sign-off with photos, type and urgency. Your partners get an email, approve or reject with a note, and every decision is kept. Each collection shows what’s still pending.

Sampling is on every plan, including the free one. Sharing styles with your factory starts on Signature, where factory seats are free. See pricing.

Frequently asked questions

What is a proto sample?

The factory’s first version of your style, made from the tech pack, usually in a similar fabric because bulk fabric isn’t ready yet. It checks the design and construction before you refine the fit.

What is the difference between a fit sample and a PP sample?

A fit sample checks fit and measurements and can go through several rounds. A PP sample is made in bulk materials with the final trims and labels, and once approved it’s the standard the bulk order is checked against.

What is a size set sample?

A set of samples in each size, or a selection of sizes, made to check that the grading works across the size range, not only in the base size.

What is a TOP sample?

A top of production sample is taken from the first finished pieces of the bulk run, to confirm the factory is producing to the approved PP sample before the whole order is made.

How many sample rounds are normal?

It depends on the style and the tech pack. A simple style with a complete spec may need one fit round; a new fit or a technical garment can need several. Clear feedback and an up-to-date tech pack keep the count down.

Who pays for garment samples?

Usually the brand. Some factories credit the sample cost against the bulk order. Agree the sample price, terms and courier costs before the first sample is made.